Signs That Your Carpet Has Molds 


Basically, carpet is attractive to mold. It can usually grow in wet areas that are the reason why the carpet is prone to mold. This issue has to be solved immediately since mold can quickly spread all over your house. As a matter of fact, it can sometimes be difficult to tell whether you’ve mold for it can thrive beneath your carpet. The following are some of the few signs that your carpet may have already been invaded with molds: 


  1. Musty Odor

It is one of the primary signs that the carpet has mold in it. If you spend your whole day in your house, then you might not notice this musty odor, however, visitors or guests will most likely smell it. If someone notices and tells you about the odor, therefore, this is already something that you’ll need to take into action. Your carpet must be checked for mold or replaced. 

  1. Age of Your Carpet

Several individuals will still choose to keep their carpet despite the need for a replacement. Aged carpet is basically more prone to be thrived by molds. In addition to that, some individuals may think that it’s normal for a carpet to smell like musty odor because it’s been there for so long but this belief is actually wrong.  

  1. Wet Carpet

Mold often grows when your carpet has been wet for several hours or longer. If the carpet has some wet spots in it, therefore, the floor beneath it might have a leak. Your carpet that is in the basements is more to develop molds. To avoid mold in your carpet, you’ll need to have the wet spot dried up immediately if there’s a leak. 

Furthermore, it is very vital to note that it doesn’t take a lot of fluid or water for the molds to develop. For instance, if you spill a drink on your carpet, then this can lead to mold formation. That is the reason why it is very important for us to clean up spills immediately.  

  1. Allergies

Mold has been known to cause breathing problems, asthma, bronchitis, and allergies. If anyone in your house has these problems, then you’ll need to examine your carpet for any signs of mold. Not all who are exposed to mold will be going to have an issue with it. But it is still wiser to check your carpet for mold every now and then. 

  1. Carpet Discoloration

You might be able to conclude where there is a presence of mold in the carpet by just looking at it. If it is already in the advanced stages, it may appear a little faded or develop a discoloration. You might see green or black spots on your carpet. Bear in mind that the portion beneath the carpet also may develop discoloration before your carpet does. That is also the reason why it is a great idea to examine underneath your carpet and hire a professional for consistent carpet cleaning service. 

  1. Mold Testing Kit

One simple way to check for mold is the use of mold testing kit. This kit works by taking an airflow test in your carpet. 



Read More

Should you DIY Steam Clean or Hire a Pro?  

Carpet cleaning is not very fun to do but it is necessary if you want your home or office looks clean. Most homeowners, however, will only clean their carpet if there are stains and some don’t clean at all. Cleaning your carpet will not only improve but will also prolong its performance; most manufacturers recommend to clean your carpet at a minimum of 12 months. Some are up to 18 months depending how much traffic your home has. Your carpet has, in fact, a condition that it should be cleaned frequently so be sure to have your warranty information checked.   

Regular cleaning is very important in every type of carpet, in the case of nylon carpet; this is absolutely true because nylon carpet contains hydrogen molecules which are the primary source of its resiliency. These hydrogen molecules are reactivated when you clean causing its fibers it to bounce back literally when it is flattened down due to foot traffic. By cleaning, the nylon carpet will actually revive and enhance its performance.  

Most carpet manufacturers recommend to clean your carpet using hot water extraction or commonly known as steam cleaning. It is a method where the hot water is sprayed essentially which is then sucked back to the machine along with dirt or soil which is on the carpet. Some cleaning solution is added to the water which assists in the removal of dirt and stains. However, the process of true steam cleaning is different but it is already accepted that the term steam cleaning is actually referring to hot water extraction.   

In a professional carpet steam cleaning, the professional cleaner may use a portable machine or a truck-mounted unit. A truck-mounted unit is more powerful than a portable unit, it is recommended to use if feasible for maximum efficiency. however, portable machine unit has also benefits such as being able to bring to your apartment or condo units that are beyond the reach of truck-mounted units.    

There are so many steam cleaning machines for do-it-yourself cleaning available for sale or rent. Having different machines available, it could make you think to either call a professional or you do it by yourself.    

When your home is prone to accidents or spills that are difficult to clean, it might be a good idea to have one cleaner for yourself but when doing a general cleaning of your carpet, it is highly recommended that you have to hire Carpet Steam Cleaning Perth to do it.  

DIY machines, in general, will not able to heat the water to the ideal temperature as professional machines which makes it less effective in cleaning and also these machines have less power in extracting water and dirt from the carpet than that of the machines use in professional cleaning. The effectiveness of the machine can be seen in its result, carpet should be slightly damp after cleaning and when your carpet is wet, then your machine is not working effectively. Stay off your carpet after you are done cleaning or you can use a fan to speed up drying.  

Read More

Reasons to Use Sandblasting 

Abrasive blasting, also known as sandblasting, is a very effective method of smoothing, stripping, or cleaning a surface. This cleaning process utilizes fine grits, such as sand, that are blown through the sandblaster’s nozzle at high pressure pointed directly onto the surface to get rid of unwanted particles, such as grime or dirt. Sandblasting in Lexington is an ideal method to get rid of abrasive dirt and get the surfaces you love look new again, whether you need to clean tanks, buildings, farm equipment or machinery, or anything else. Here are several reasons why sandblasting might be the best method for you: 


Quick Turnaround 

This technique could take the hardest cleaning tasks efficiently and quickly. The feature of sand being a fine grain makes it a great abrasive. A lot of cleaning tasks that would take days or weeks to finish could be done in hours with this technique. Items with a cross-section of 2mm or more could be instantly sandblasted since the speed and the precision of this stripping and cleaning technique is impressive. With sandblasting, even the strongest mill scale could be removed quickly. Corrosion and old paint could be removed swiftly. This leaves the metal a plain surface without any foreign matter or any contamination. 

Simple Technique 

Several cleaning methods need a lengthy procedure and a lot of steps. On the other hand, abrasive blasting does not need any heavy duty cleanup, harsh chemicals, or scrubbing. You will not toil away cleaning and scrubbing with you choose sandblasting method. This process is easy, quick, and finished in simply a few minutes.  

 Tough on Rust 

Since it quickly spreads and corrodes metal easily, rust could cause a huge amount of damage to property. It damages all types of metals and could even cause some malfunctioning of the equipment if rust is left to build up over time. An efficient way to eliminate rust is by using sandblasting. This would keep your equipment usable for a longer time.  

Versatile Solution 

Sandblasting could get rid of residue, dust, dirt, and much more. This leaves the surface look new again. This technique isn’t simply a technique to clean huge areas. However, it could be utilized on precision and small parts, like delicate surfaces or gears. Sandblasting could be your ideal option, from rusty fences to trucks to tanks.  

Good Surface Prep 

Sandblasting, together with cleaning surfaces, also offers an ideal way to prepare surfaces for different sealants and coatings. This method will get off all the contaminants and dirt of the surface. Thus, the coating would stick better. 

Environmentally Friendly 

Usually, a sandblasting is a non-toxic and eco-friendly process. That is one of the best advantages of the method. It remains harmless to the environment, unless you add outside pollutants to the equipment. Don’t worry; sandblasting is also safe for the sandblaster. Usually, the used products in this process have been verified to be safe even if you inhale it, unlike most cleaning products and coatings.  

Read More

Recent Comments